Replacing a Posted Worker Mid-Contract: A1 & RUT Update Guide 2026
Photo: Rohan Batra / Pexels

Replacing a Posted Worker Mid-Contract: A1 & RUT Update Guide 2026

Author: eNoWork· Published ·6 min read

Replacing a posted worker in the middle of a contract is one of the most compliance-sensitive moments in cross-border construction work. The moment a Polish or other EU worker leaves a Danish site and a replacement steps in, two parallel administrative tracks must be updated: the A1 certificate that proves social-security coverage in the home country, and the RUT registration that notifies Danish authorities of the posting. Missing either step exposes the employer to control visits, fines and liability for unpaid contributions. This guide walks site managers and HR teams through every practical action required when a posted worker replacement takes place mid-contract.

Why the A1 Certificate and RUT Registration Are Linked

The A1 certificate, issued under Regulation (EC) No 883/2004, certifies that a worker remains subject to the social-security legislation of their home member state during a posting. Each certificate is issued for a named individual. When that individual leaves the project, their certificate no longer covers the new worker, and a fresh A1 must be obtained before the replacement begins work. At the same time, the Danish Act on posting of workers (LOV 89 and its successor framework) requires that every change of posted worker be reported in the RUT register, which is administered by Arbejdstilsynet. The two documents travel together: an outdated RUT entry without a matching A1 is a red flag for inspectors from both Arbejdstilsynet and SKAT.

Step 1, Notify RUT Before the New Worker Arrives

The RUT notification must be submitted before the replacement worker starts on site. Employers and their Danish clients or main contractors can both carry obligations here, so it is worth clarifying in your subcontract who files the update. The registration is made through Virk.dk's RUT portal, where you update the existing service notification with the new worker's name, personal identification and expected period. For a deeper look at how subcontractor chains affect RUT obligations, see our article on RUT Registration & Subcontractors on Danish Sites 2026.

What information must be updated in RUT

  • Full name and date of birth of the replacement worker
  • Home-country address
  • Start date on the Danish site
  • The service or trade category (must match the original notification if the scope of work is unchanged)
  • Name and contact details of the responsible person on site

Arbejdstilsynet publishes a guidance note on RUT obligations that clarifies exactly which fields trigger a mandatory update versus those that are optional corrections.

Step 2, Cancel or Withdraw the Departing Worker's A1

In Poland, A1 certificates for posted workers are issued by ZUS (Zakad Ubezpieczen Spolecznych). When a worker returns home before the original end date, the employer should notify ZUS so the certificate can be withdrawn or its validity period corrected. Leaving an active A1 in place for a worker who is no longer on site creates a mismatch that can surface during a ZUS audit or a joint inspection by the Polish Labour Inspectorate (PIP) and Arbejdstilsynet. The withdrawal request is submitted through the same ZUS channel used for the original application.

Step 3, Apply for a New A1 for the Replacement Worker

The replacement worker needs their own A1 before they cross the border. ZUS processes A1 applications on the basis of the employment contract, proof of posting and confirmation that the worker is ordinarily employed in Poland. The employer must demonstrate that the company carries out substantial activity in Poland, a requirement set out in Regulation (EC) No 987/2009, which lays down the implementing rules for the coordination framework. Processing times at ZUS can vary, so apply as early as possible to avoid a gap in coverage.

Documents typically needed for a new A1 application

  1. Employment contract with the replacement worker (must predate the posting)
  2. Posting agreement or secondment letter specifying the Danish project
  3. Proof of the employer's business activity in Poland (e.g. recent tax declarations or ZUS contribution records)
  4. Copy of the Danish contract or work order

Keeping these documents in a structured digital format saves significant time when inspectors request them. Our guide on the Digital Worker File on the PL-DK Route: A 2026 Guide explains how to organise and retain the full compliance dossier for each worker.

Step 4, Verify Pay and Working-Conditions Compliance for the New Worker

A worker replacement is also a natural checkpoint for reviewing whether the terms of employment meet Danish standards. Posted workers in Denmark are entitled to the minimum pay rates set in applicable collective agreements, including those negotiated by unions such as 3F. The Danish Ministry of Employment maintains an overview of the hard-core rights that apply to all posted workers regardless of home-country law. Site managers should confirm that the new worker's contract reflects the correct rates before the first day on site.

Step 5, Inform the Danish Client or Main Contractor

Under Danish posting rules, the client or main contractor may share liability if a subcontractor fails to comply with pay and registration obligations. Proactively sending the updated RUT reference number and a copy of the new A1 to the main contractor protects all parties and demonstrates good-faith compliance. It also reduces the risk of a work stoppage ordered by Arbejdstilsynet during a site inspection.

Common Pitfalls and How to Avoid Them

The most frequent mistake is treating the replacement as an administrative formality and delaying the RUT update until after the new worker has already started. A second common error is assuming that a blanket A1 issued for a project covers any worker the employer sends, which is not how the regulation works: each certificate names one individual. A third pitfall is failing to update the RUT entry when the replacement worker's end date later changes. Every extension must be reported before the original end date lapses.

As compliance processes grow more complex, some companies are exploring software tools to track certificate expiry dates and trigger RUT updates automatically. The limits of such automation are worth understanding before you rely on it fully; our article on Automation in Staffing Agencies: Why Human Oversight Still Matters in 2026 examines where human review remains essential.

Concrete Next Steps for Employers

  • Today: Check whether any current A1 certificates will expire before your project end date and flag workers whose contracts may need to be extended or replaced.
  • Before any replacement: Submit the RUT update on Virk.dk and obtain the new worker's A1 from ZUS before they travel to Denmark.
  • On arrival: Verify that the A1 certificate matches the RUT entry (name, period, employer) and hand a copy to the site manager.
  • Ongoing: Keep a centralised log of all active A1 certificates with expiry alerts, and store supporting documents for at least the retention period required under Danish record-keeping rules.
  • After the project: Confirm with ZUS that any withdrawn or expired A1 certificates are correctly closed in their system to avoid future discrepancies.
Sources

Foreign crew on site?

Hours, rotations and chat in one app.

Try free for 30 days
Tags
posted worker replacementA1 certificate updateRUT registration Denmarkposted workers Denmark 2026Arbejdstilsynet notificationZUS A1 form